May 12, 2021 - Finishing the teak swim step / Dewatering Pump

May 12, 2021 - Finishing the teak swim step / Dewatering Pump

The teak swim step is in it's final phase of clean-up with the "proprietary" caulking used to fill the gaps between the panels cured (5-days) and the excess is being removed!



Meanwhile the (emergency) dewatering pump has arrived (110 gpm capability) and is in it final stages of wiring.  We added this to the boat (along with an AED) as emergency equipment.  Given we had a prior experience with water invading the boat - this seemed prudent.

This is an 110V electric pump.  A gasoline pump seemed to add an unwanted hazard and a hydraulic version had constraints with which I did not feel comfortable.  The electric version is somewhat mobile (~70 lbs) and can be powered by our batteries (via inverter).  Also with a 25 kW and 6 kW generator I concluded we had all sorts of power options to drive the unit.


110 gpm dewatering pump


Location: A-2, 2700 W Commodore Way, Seattle, WA 98199, USA

Comments

Post a Comment

Popular posts from this blog

January 11, 2023 - Van Isles, BC - On the hard

Image
January 11,  2023 - Van Isles, BC - On the hard Prior to arriving to Philbrook's we had started a dialogue regarding the work list, along with photos, to help with estimating and pre-planning.  This was useful as I was able to ensure that the parts (transducers and paint) were available and transported them with us avoiding any lead time issues or transportation cost associated with a border crossing. Our project manager, Ian, checked in with us first thing on Monday.  Ian promply started introducing us to the leads responsible for the work packages.  The whole process was very professional with good collaboration.  I was able to walk through each item of my list with the appropriate lead and discuss details.  Immediately after being hauled out we had people on the boat starting work on various projects. Servicing of the salon compressor was completed prior to haul-out with just a topping off of the refrigerant to account for the cooler NW climate, versus t...
Read more

August 25, 2025 - Everett

August 25, 2025 - Everett An uneventful return to Everett from Roche Harbor.  As we settled in we were soon greeted by Ron and Gretchen and Lois whipped up a nice meal that lasted well into the evening.   This competed 128 days. 3,580 NM of travel on Raven of which 88 days were in SE Alaska.   A good trip with, unfortunately, too much rain.   We had three boardings: US Coast Guard & Customs and Border Patrol Boarding ADFG Boarding CBSA Boarding   We only had a few minor problems: Windlass minor repair Failing transmission rocker switch Failed washdown pump   Our fishing was salmon focused: 17 Coho 22” – 30” 10 Halibut 20” – 31” 26 Dungeness crabs   We experienced some peripheral events: June 16 - Cruise ship breaking its mooring July 29 – Russian Tsunami Aug 10 - Landslide in Tracy Arm   We were gifted lots of wildlife: Humpback whales display Orca whales display Dahls porpoise Harbor porpoise Seals Sea lions Sea otters River ot...
Read more

June 3 - June 16, 2024 - Wrangell

Image
June 3 - June 16, 2024 - Wrangell Calm morning and conditions for the transit to Wrangell pulling in between two fish boats.  We kept an eye on a boat in an ideal corner spot for us to type up on the opposite dock.  Soon they were on their way, and we repositioned to the opposite dock.  Once settled we began housekeeping chores so  Raven  would be ready for our return.  Geary, with help from Lois changed out the engine, generator, and get-home drive zincs.   Sylvia from Alaska Vistas gave us a lift to her office so we could make our deposit on our Anan Wildlife Tour in August.  Unfortunately, Ian Nelson of Nelson Diving, was ill and could not make our appointment for a bottom clean.  Brian Schwartz, Alaska Legacy Security, arrived and we set him up to monitor  Raven  while we are gone to Seattle from June 4 – June 16, retuning on June 17. Red Crossbill Replaced zincs ....
Read more